Rigid PVC Vertical Blinds

Code: global

New for 2018 Rigid PVC Vertical Blinds

Flat 89mm louvers - coloured both sides

Each louver is solid so black-out and fully wipeable 

Perfect for bathroom or kitchens 

Rigid PVC Vertical Blinds

Quick Order

Order or price multiple blinds of the same colour, change all the options together or edit the options for each blind separately.

Maximum Blind Size: mm x mm
You can enter your sizes in centimeters, millimeters or inches.
mm cm inch
Add More
Add to Basket


Waterproof Vertical Blinds

The ideal solution for bathrooms, wet rooms or kitchens alike. The versatility of a Waterproof Vertical Blind allows you to stack the vanes right out of the way or tilt the slats to your desired angle to create privacy whilst still letting some light in.

All of the fabrics featured in this range are made from fire retardant PVC making them a completely waterproof & durable material which can be wiped clean with a damp cloth and offers no risk of shrinking over time like polyester or cotton can in moist conditions. This also makes them perfect for commercial settings such as schools, hospitals or care homes where you need to comply with fire regulations. The bold colours and long lasting durability on offer provides a welcome change to traditional collections of vertical blinds.




How to Measure

Measuring for inside a Recess

measuring for recess blinds

First ensure that the recess your blind is going into is not obstructed in any way so the blind can hang freely.
Look out for protruding tiles, pipes, skirting boards etc.

Measure at the top, middle and bottom of the window recess and note down the smallest measurements to the nearest millimetre, this is the recess size.

We will make your blind smaller to fit into the recess.

There is no need for you to make any adjustments we do this in production THIS IS CALLED RECESS SIZE

Your Blind will arrive about 5-10mm smaller, so it hangs freely and fits perfect within the recess

All Fabric Blinds will have a narrower fabric width than the total blind size ordered. This is to accommodate the side controls and brackets etc.
This applies to both recess and exact sizes.  For Roller Blinds this can be up to -35mm  

Measuring for outside a recess or Exact

measuring for exact blinds 

Decide how much you want to overlap the blind on all sides - we recommend this should be at least 50mm (2 inches) each side in most instances.
or the exact size you want the blind to be, if fitting inside a recess

Carefully measure the at the top, middle and bottom for the width and the left, right and middle for the drop

on roller blinds and some shades ( Facette, Silhouette, Multishade etc ) the fabric will be less than the overall width of the blind/sizes given, so you must allow for this.

We will make your blind to your exact sizes.
The product in its brackets is supplied exactly to the size that has been ordered. THIS IS CALLED EXACT SIZE
Subject to the normal manufactures working +/- tolerances


In Short - Recess we make the allowance - Exact you make the allowance


In Compliance with Child Safety Laws EN13120 - Blinds with cord or chains will be less than or equal to 1000mm, this is for blinds up to 2500mm drop. For blinds with a drop greater than 2500mm the control length will be less or equal to the drop of the blind minus 1500mm. If you supply us with the installation height the distance from the floor to the end of the control will be 1500mm off the floor. 

Measuring for Bay Window

  1. Determine the depth of the blinds you are mounting and use this for the width of your cardboard:
    Contact us for Blind depths.
  2. Cut two pieces of cardboard (depth determined from 1 above) wide by 30cm (12") long.
    Important: If spacer blocks or extension brackets will be used for extra clearance on outside mounts, add the amount of extra clearance to the width dimension of the cardboard before measuring.
  3. Place the strips in the left angle first, and bring them together until the front corners of the cardboard meet. Mark points "A" and "B".
  4. Repeat this step for the right side angle, marking points "C" and "D".
  5. Measure between points "B" and "C" to obtain the width measurement of the center blind.
  6. Measure from point "A" outward to the desired width to obtain the width measurement of the left blind.
  7. Measure from point "D" outward to the desired width to obtain the width measurement of the right blind.
  8. Deduct about 5mm from each of your measurements to allow for clearance, and order Exact


Order a sample:

Samples cost just £1 each, you will automatically receive a £5 promotional code off your future blind order.
Select your samples from the list below.
Enter Your Sizes
Your Measurements
mm cm inch
Width: Drop: Set Size clear sizes
Select Slat Size
Rigid PVC Vertical Blinds (change)