Luxaflex essential Woven Wood

Code: Lux

Luxaflex Essential®  Woven Wood Roman Blinds are manufactured to the highest standards.

Pinoleum blinds are made from reeds and veneers of natural woods which woven together in different combinations create a variety of textured effects.

Available with co-ordinating or constrasting edging braid with the option of blackout lining to some of the fabrics.

Luxaflex essential Woven Wood Luxaflex essential Woven Wood

Quick Order

Order or price multiple blinds of the same colour, change all the options together or edit the options for each blind separately.

Maximum Blind Size: mm x mm
You can enter your sizes in centimeters, millimeters or inches.
mm cm inch
Width
Drop
Slat
Price
Delete
Add More
Add to Basket

Fitting Instructions

Fitting Instructions

Braids

Luxaflex® Essential Edging Braids not only provide a practical use but give a decorative finish to each blind.

Please note that some of the weaves are not available with edging braid - see below

 

Download Colours here 

STANDARD EDGING BRAID COLOUR  

CODE NAME BRAID
0001 Dijon Cream Ecru
0002 Dijon Antique White Ecru
0003 Antibes Parchment Ecru
0004 Antibes Scandi White
0005 Breton Pure White Whie
0006 Dijon Rose Ecru
0007 Dijon Beige Ecru
0008 Salis Grey Grey
0009 Antibes Pebble Grey
0010 Antibes Mushroom Bronze
0011 Antibes Granite Slate
0012 Antibes Indigo Marine
0013 Breton Pine Evergreen
0014 Antibes Natural Ecru
0015 Salis Natural Ecru
0016 Makemo No Braid
0017 Futuna No Braid
0018 Marco Sand No Braid
0019 Marco Fawn No Braid
0020 Marco Stone No Braid
0021 Marco Conker No Braid
0022 Spirit Light No Braid
0023 Spirit Natural No Braid
0024 Spirit Voile Blanc No Braid
0025 Spirit Voile Sand No Briad

How to Measure


Measuring for inside a Recess



First ensure that the recess your blind is going into is not obstructed in any way so the blind can hang freely.
Look out for protruding tiles, pipes, skirting boards etc.


Measure at the top, middle and bottom of the window recess and note down the smallest measurements to the nearest millimetre, this is the recess size.

We will make your blind smaller to fit into the recess.

There is no need for you to make any adjustments we do this in production THIS IS CALLED RECESS SIZE

Your Blind will arrive about 5-10mm smaller, so it hangs freely and fits perfect within the recess


All Fabric Blinds will have a narrower fabric width than the total blind size ordered. This is to accommodate the side controls and brackets etc.
This applies to both recess and exact sizes.  For Roller Blinds this can be up to -35mm  

For Venetian Blinds the recess allowance is only taken from the width.
 


Measuring for outside a recess or Exact

 

Decide how much you want to overlap the blind on all sides - we recommend this should be at least 50mm (2 inches) each side in most instances.
or the exact size you want the blind to be, if fitting inside a recess

Carefully measure the at the top, middle and bottom for the width and the left, right and middle for the drop

REMEMBER
on roller blinds and some shades ( Facette, Silhouette, Multishade etc ) the fabric will be less than the overall width of the blind/sizes given, so you must allow for this.

We will make your blind to your exact sizes.
The product in its brackets is supplied exactly to the size that has been ordered. THIS IS CALLED EXACT SIZE
Subject to the normal manufactures working +/- tolerances

 

In Short - Recess we make the allowance - Exact you make the allowance

 

In Compliance with Child Safety Laws EN13120 - Blinds with cord or chains will be less than or equal to 1000mm, this is for blinds up to 2500mm drop. For blinds with a drop greater than 2500mm the control length will be less or equal to the drop of the blind minus 1500mm. If you supply us with the installation height the distance from the floor to the end of the control will be 1500mm off the floor. 


Measuring for Bay Window

  1. Determine the depth of the blinds you are mounting and use this for the width of your cardboard:
    Contact us for Blind depths.
  2. Cut two pieces of cardboard (depth determined from 1 above) wide by 30cm (12") long.
    Important: If spacer blocks or extension brackets will be used for extra clearance on outside mounts, add the amount of extra clearance to the width dimension of the cardboard before measuring.
  3. Place the strips in the left angle first, and bring them together until the front corners of the cardboard meet. Mark points "A" and "B".
  4. Repeat this step for the right side angle, marking points "C" and "D".
  5. Measure between points "B" and "C" to obtain the width measurement of the center blind.
  6. Measure from point "A" outward to the desired width to obtain the width measurement of the left blind.
  7. Measure from point "D" outward to the desired width to obtain the width measurement of the right blind.
  8. Deduct about 5mm from each of your measurements to allow for clearance, and order Exact