The new 2013 Luxaflex Silhouette collection has 8 exclusive fabric types, and 4 vane/slat widths 50mm, 63mm, 75mm & 100mm. The 100mm vane provides superior view-through, light control, style and quality all in one. This vane size is perfect for rooms with larger windows and expansive views offering a soft ‘shutter’ look while adding interest to a room.
The ingenious construction of soft rotating fabric vanes suspended between two sheer fabric layers allows a gentle translucency into your home. Create an endless variety of moods by inclining the vanes so that you can let more or less light pass through to your room.
Soft as Silk, elegant as a curtain, practical as a Venetian blind
Product available for purchase
Order or price multiple blinds of the same colour, change all the options together or edit the options for each blind separately.
Maximum Blind Size: mm x mm
You can enter your sizes in centimeters, millimeters or inches.
mm cm inch
New 63mm Vane Size
3 new colours in a soft woven 63mm Silhouette fabric.
Prevents 25% more heat from entering the room when opened due to the screen like sheer on the reverse; also provides a serene uninterrupted view Coloured sheer on the front, coloured screen-like sheer on the reverse side.
First ensure that the recess your blind is going into is not obstructed in any way so the blind can hang freely when fully extended. Look out for protruding tiles, pipes, skirting boards etc.
Measure the width from A to B and the drop from C to D (see diagram to the right). We recommend you do this in several places to allow for any slight size variation and note down the smallest measurements to the nearest millimetre. If you prefer you can measure in inches or centimeters, and order that way.
We will make your blind smaller to fit into the recess. There is no need for you to make any adjustments. THIS IS CALLED RECESS SIZE
Your Blind willarrive about 5-10mm smaller, so it hangs freely and fits perfect within the recess
This blind will have a narrower fabric width than the total blind size ordered. This is to accommodate the side controls, casette etc.
Measuring for outside a recess or Exact
Decide how much you want to overlap the blind on all sides - we recommend this should be at least 50mm (2 inches) each side in most instances. or the exact size you want the blind to be, if fitting inside a recess
Carefully measure the width from E to F (see the diagram to your right) and the drop from G to H and note down the smallest measurements to the nearest millimetre. If you prefer you can measure in inches or centimeters, and order that way.
REMEMBER the fabric will be less than the overall width of the blind/sizes given, so you must allow for this.
We will make your blind to your exact sizes. The product in its brackets is supplied exactly to the size that has been ordered.THIS IS CALLED EXACT SIZE Subject to the normal manufactures working +/- tolerances
In Short - Recess we make the allowance - Exact you make the allowance
Measuring for Bay Window
Determine the depth of the blinds you are mounting and use this for the width of your cardboard: Contact us for Blind depths.
Cut two pieces of cardboard (depth determined from 1 above) wide by 30cm (12") long. Important: If spacer blocks or extension brackets will be used for extra clearance on outside mounts, add the amount of extra clearance to the width dimension of the cardboard before measuring.
Place the strips in the left angle first, and bring them together until the front corners of the cardboard meet. Mark points "A" and "B".
Repeat this step for the right side angle, marking points "C" and "D".
Measure between points "B" and "C" to obtain the width measurement of the center blind.
Measure from point "A" outward to the desired width to obtain the width measurement of the left blind.
Measure from point "D" outward to the desired width to obtain the width measurement of the right blind.
Deduct about 5mm from each of your measurements to allow for clearance, and order Exact