Next Day DuoRol Blinds

Code: TROP

Available in a selection of colours and textures.  A Multishade Duorol blind is attractive yet practical.

When open the blind lets light in yet gives enough privacy where needed.
When closed the blind fabric gives warmth and total privacy to any room.

Delivered next working day

Next Day DuoRol Blinds Next Day DuoRol Blinds Next Day DuoRol Blinds Next Day DuoRol Blinds Next Day DuoRol Blinds Next Day DuoRol Blinds Next Day DuoRol Blinds

Quick Order

Order or price multiple blinds of the same colour, change all the options together or edit the options for each blind separately.

Maximum Blind Size: mm x mm
You can enter your sizes in centimeters, millimeters or inches.
mm cm inch
Width
Drop
Slat
Price
Delete
Add More
Add to Basket
Select Colour

Spring Fabrics

A range of pastel polyester fabrics with a self coloured fine cross thread

Voile Panelled

Diamond silver metallic type fabrics, with a voile panel, rather than the mesh panels in all the other groups

Madera Collection

Madera Collection

Natural woven weave fabrics with a very fine panel grid

*Please note that preciseness of colour cannot be guaranteed as this depends on the screen settings of your computer.

Delivery

Next Working Day if ordered by 10.30am

Fabric Details

A modern and practical alternative to roller and venetian blinds.  Control light and privacy, raise up and down with one single control.

Further Details

Min size 500mm wide
Max size 2400mm wide x 2600mm drop (madera fabric only 2400mm drop)

Headrail cassette size is 68mm high x 73mm deep.

Fabric is 16mm less than the cassette on the control side, 7mm less on the opposite site.

Control chain is a endless chain of set lengths - 800-1100-1400-1800-2400-3000-3600-4200mm

Motorisation

Video

How to Measure


Measuring for inside a Recess

measuring for recess blinds

First ensure that the recess your blind is going into is not obstructed in any way so the blind can hang freely.
Look out for protruding tiles, pipes, skirting boards etc.


Measure at the top, middle and bottom of the window recess and note down the smallest measurements to the nearest millimetre, this is the recess size.

We will make your blind smaller to fit into the recess.

There is no need for you to make any adjustments we do this in production THIS IS CALLED RECESS SIZE

Your Blind will arrive about 5-10mm smaller, so it hangs freely and fits perfect within the recess

All Fabric Blinds will have a narrower fabric width than the total blind size ordered. This is to accommodate the side controls and brackets etc.
This applies to both recess and exact sizes.  For Roller Blinds this can be up to -35mm  
 

Measuring for outside a recess or Exact

measuring for exact blinds 

Decide how much you want to overlap the blind on all sides - we recommend this should be at least 50mm (2 inches) each side in most instances.
or the exact size you want the blind to be, if fitting inside a recess

Carefully measure the at the top, middle and bottom for the width and the left, right and middle for the drop

REMEMBER
on roller blinds and some shades ( Facette, Silhouette, Multishade etc ) the fabric will be less than the overall width of the blind/sizes given, so you must allow for this.

We will make your blind to your exact sizes.
The product in its brackets is supplied exactly to the size that has been ordered. THIS IS CALLED EXACT SIZE
Subject to the normal manufactures working +/- tolerances

 

In Short - Recess we make the allowance - Exact you make the allowance

 

In Compliance with Child Safety Laws EN13120 - Blinds with cord or chains will be less than or equal to 1000mm, this is for blinds up to 2500mm drop. For blinds with a drop greater than 2500mm the control length will be less or equal to the drop of the blind minus 1500mm. If you supply us with the installation height the distance from the floor to the end of the control will be 1500mm off the floor. 


Measuring for Bay Window

  1. Determine the depth of the blinds you are mounting and use this for the width of your cardboard:
    Contact us for Blind depths.
  2. Cut two pieces of cardboard (depth determined from 1 above) wide by 30cm (12") long.
    Important: If spacer blocks or extension brackets will be used for extra clearance on outside mounts, add the amount of extra clearance to the width dimension of the cardboard before measuring.
  3. Place the strips in the left angle first, and bring them together until the front corners of the cardboard meet. Mark points "A" and "B".
  4. Repeat this step for the right side angle, marking points "C" and "D".
  5. Measure between points "B" and "C" to obtain the width measurement of the center blind.
  6. Measure from point "A" outward to the desired width to obtain the width measurement of the left blind.
  7. Measure from point "D" outward to the desired width to obtain the width measurement of the right blind.
  8. Deduct about 5mm from each of your measurements to allow for clearance, and order Exact

 

Order a sample:

Samples cost just £1 each, you will automatically receive a £5 promotional code off your future blind order.
Select your samples from the list below.