Luxaflex essentials Faux Wood Blinds 38mm

The NEW 2020 Luxaflex essentials Faux Wood blind collection. Also available in 50mm slats.
From popular neutral shades to contemporary greys, and natural colours.
Available with or without tapes, in complementary, contrasting or contemporary prints, Faux Wood Venetians are the must-have blind for any home.

View Colours
Delivered in 3-4 weeks.
Details
Each blind is supplied with tilt cords on the left side and the raise/lower cords on the right side
All control cords and acorns are colour co-ordinated with the slats
A cord consolidator is fitted to all blinds to assist with child safety. A child safety device is still required.
A valance to match the wood slats is included.
38mm blinds are supplied with a headrail that is 39mm x 39.8mm
All blinds are supplied with top fix/face fix brackets.
View stacking height, view ladder tape specifier.

Specifications
Measuring guide
View measuring guide
Fitting guide
View fitting guide for Luxaflex Free Hanging Wooden Blinds
Guides

Measuring for inside a Recess

First ensure that the recess your blind is going into is not obstructed in any way so the blind can hang freely. Look out for protruding tiles, pipes, skirting boards etc.

Measure at the top, middle and bottom of the window recess and note down the smallest measurements to the nearest millimetre, this is the recess size.

We will make your blind smaller to fit into the recess.

There is no need for you to make any adjustments we do this in production this is called recess size

Your blind will arrive about 3-10mm smaller, so it hangs freely and fits perfect within the recess

Measuring for outside a recess or Exact

Decide how much you want to overlap the blind on all sides - we recommend this should be at least 50mm (2 inches) each side in most instances, or the exact size you want the blind to be, if fitting inside a recess

Carefully measure the at the top, middle and bottom for the width and the left, right and middle for the drop

Remember on most blinds the fabric will be less than the overall width of the blind ordered. You should allow for this when measuring outside a recess.

We will make your blind to your exact sizes. The blind in its brackets/headrail/cassette (widest point) will be supplied exactly to the size that has been ordered. this is called exact size Subject to the normal manufactures working +/- tolerances

Whether measuring for a recess or exact please remember the fabric will always be narrower than the overall blind size to allow for components such as side controls and brackets.
This varies depending on the product, Roller blinds for example have a fabric width 30-34mmn less than the overall blind size.
Contact us if you require clarification regarding your chosen product.

Measuring for Bay Window

Determine the depth of the blinds you are mounting and use this for the width of your cardboard: Contact us for Blind depths.

Cut two pieces of cardboard (depth determined from 1 above) wide by 30cm (12") long.
Important: If spacer blocks or extension brackets will be used for extra clearance on outside mounts, add the amount of extra clearance to the width dimension of the cardboard before measuring.

Place the strips in the left angle first, and bring them together until the front corners of the cardboard meet. Mark points "A" and "B".

Repeat this step for the right side angle, marking points "C" and "D".

Measure between points "B" and "C" to obtain the width measurement of the center blind.

Measure from point "A" outward to the desired width to obtain the width measurement of the left blind.

Measure from point "D" outward to the desired width to obtain the width measurement of the right blind.

Deduct about 5mm from each of your measurements to allow for clearance, and order Exact