Luxaflex essentials Wooden Blinds

Code: LUXAFLEX

The new 2020 Luxaflex essentials wooden blind collection 

From popular neutral shades to contemporary greys, and naturally stunning, stained colours. 

Renewably sourced from sustainable forests, we make sure that we do not compromise on quality within our range.

Available with or without tapes, in complementary, contrasting or contemporary prints, Wood Venetians are the must-have blind for any home.

Luxaflex essentials Wooden Blinds

Quick Order

Order or price multiple blinds of the same colour, change all the options together or edit the options for each blind separately.

Maximum Blind Size: mm x mm
You can enter your sizes in centimeters, millimeters or inches.
mm cm inch
Width
Drop
Slat
Price
Delete
Add More
Add to Basket
Select Colour

essentials Natural Collection

Real Timber, renewably sourced from sustainable forests, we make sure that we do not compromise on quality within our range.

Faux Wood Expressions

Faux Wood Expressions

Naturally waterproof these faux wood type blinds designed for use in bathrooms, steamy hot kitchens anywhere normal timber might have warped or split. Repelling water, stream, grease and even dirt. The look of real timber but practical and robust

*Please note that preciseness of colour cannot be guaranteed as this depends on the screen settings of your computer.

Product Spec

A valance to match the wood slats is included - blinds ordered as recess will be supplied with a straight valance, blinds ordered exact will be supplied with a straight valance and side returns for outside recess fixings.

Natural Timbers - 35mm slats headrail size is 40mm x 40mm - 50mm slats the headrail size is 59mm x 40mm

Faux Wood - 50mm & 63mm slats the headrail size is 58mm x 39mm - for 38mm slats the headrail is 39mm x 39mm

No recess allowance to made to the drop 

Controls can not be on the same side for blinds under 450mm 

How to Measure

The information below is for standard free hanging blinds only, for INTU Perfect-Fit, & Tru-fit blinds please follow their unique how to measure instructions 

 

Measuring for inside a Recess



First ensure that the recess your blind is going into is not obstructed in any way so the blind can hang freely.
Look out for protruding tiles, pipes, skirting boards etc.


Measure at the top, middle and bottom of the window recess and note down the smallest measurements to the nearest millimetre, this is the recess size.

We will make your blind smaller to fit into the recess.

There is no need for you to make any adjustments we do this in production THIS IS CALLED RECESS SIZE

Your Blind will arrive about 3-10mm smaller, so it hangs freely and fits perfect within the recess


All Fabric Blinds will have a narrower fabric width than the total blind size ordered. This is to accommodate the side controls and brackets etc.
This applies to both recess and exact sizes.  For Roller Blinds this can be up to -35mm  

For Venetian Blinds the recess allowance is only taken from the width.
 


Measuring for outside a recess or Exact

 

Decide how much you want to overlap the blind on all sides - we recommend this should be at least 50mm (2 inches) each side in most instances.
or the exact size you want the blind to be, if fitting inside a recess

Carefully measure the at the top, middle and bottom for the width and the left, right and middle for the drop

REMEMBER
on roller blinds and some shades ( Facette, Silhouette, Multishade etc ) the fabric will be less than the overall width of the blind/sizes given, so you must allow for this.

We will make your blind to your exact sizes.
The product in its brackets is supplied exactly to the size that has been ordered. THIS IS CALLED EXACT SIZE
Subject to the normal manufactures working +/- tolerances

 

In Short - Recess we make the allowance - Exact you make the allowance

 

In Compliance with Child Safety Laws EN13120 - Blinds with cord or chains will be less than or equal to 1000mm, this is for blinds up to 2500mm drop. For blinds with a drop greater than 2500mm the control length will be less or equal to the drop of the blind minus 1500mm. If you supply us with the installation height the distance from the floor to the end of the control will be 1500mm off the floor. 


Measuring for Bay Window

  1. Determine the depth of the blinds you are mounting and use this for the width of your cardboard:
    Contact us for Blind depths.
  2. Cut two pieces of cardboard (depth determined from 1 above) wide by 30cm (12") long.
    Important: If spacer blocks or extension brackets will be used for extra clearance on outside mounts, add the amount of extra clearance to the width dimension of the cardboard before measuring.
  3. Place the strips in the left angle first, and bring them together until the front corners of the cardboard meet. Mark points "A" and "B".
  4. Repeat this step for the right side angle, marking points "C" and "D".
  5. Measure between points "B" and "C" to obtain the width measurement of the center blind.
  6. Measure from point "A" outward to the desired width to obtain the width measurement of the left blind.
  7. Measure from point "D" outward to the desired width to obtain the width measurement of the right blind.
  8. Deduct about 5mm from each of your measurements to allow for clearance, and order Exact

 

Order a sample:

Samples cost just £1 each, you will automatically receive a £5 promotional code off your future blind order.
Select your samples from the list below.