Flexibility of Fit
This product is fitted within the window recess only or at the edge of the recess.
For a recess fixing measure point where you intend to fit the blind,
For an Edge fitting measure at the very front of the recess.
Inside Recess: You have the flexibility of positioning the blind within the recess using a baton on each side of the window.
The recess depth needs to be 50mm deep
- The three width measurements cannot differ by more than 6mm, and the middle width cannot be more than 2mm narrower than the top width. If your window does not fit these constraints you will need to pack the window so it complies.
- Height is measured in millimetres (mm). Your blind will be manufactured with enough fabric to cover this height (plus a little extra). The height measurements cannot differ by more than 5mm. If your window is very uneven and does not fit these constraints you will need to pack the window so it complies.
- Both side channels are supplied at the same shorter length