0151 924 9494
from £265.44

Luxaflex Top Down Bottom Up Metal Venetian Blinds 25mm

3269 Deadflat

View product information

Enter Your Measurements
Min 270mm. Max 1500mm
Min 200mm. Max 2500mm
   Lowest Price Guaranteed
   Delivered in 4-5 weeks
   Child Safety compliant with EN 13120
from £265.44
Luxaflex Top Down Bottom Up Metal Venetian Blinds 25mm

3269 Deadflat

View product information

  • Choose between subtle patterns or bold and beautiful textures.  

    Do you live on a street where your windows are overlooked or do you require privacy at the lower half of your window but still need the light within the room?

    Well, Luxaflex® top down bottom up blinds are just the answer!  Most window blinds rise up from the bottom of the window letting the light in but also leaving your window open for passers by to look in. Our top down or the bottom up meet all your privacy needs while still giving you access to natural light.

    Luxaflex® Metal Venetian Blinds with top down bottom up are the ultimate in versatility.

    Perfect for this kitchen area to provide privacy yet lets the light in.

    Max Width x Drop size 2sm

    Watch the product Video here 

    Details
  • Product Specification

    Max width x drop size is 2.0mS

    Fabric Specification

    Specifications
  • Guides

Measuring Guide

Measuring for inside a Recess

First ensure that the recess your blind is going into is not obstructed in any way so the blind can hang freely. Look out for protruding tiles, pipes, skirting boards etc.

Measure at the top, middle and bottom of the window recess and note down the smallest measurements to the nearest millimetre, this is the recess size.

We will make your blind smaller to fit into the recess.

There is no need for you to make any adjustments we do this in production this is called recess size

Your blind will arrive slightly smaller than the recess size, it will then hang freely within the recess at the correct size.

If you want to make your own allowances order as ‘exact’ which is explained below.

Measuring for inside a recess
Measuring for outside a recess or exact

Measuring for outside a recess or Exact

Decide how much you want to overlap the blind on all sides - we recommend this should be at least 50mm (2 inches) each side in most instances, or the exact size you want the blind to be, if fitting inside a recess

Carefully measure the at the top, middle and bottom for the width and the left, right and middle for the drop

Remember on most blinds the fabric will be less than the overall width of the blind ordered. You should allow for this when measuring outside a recess.

We will make your blind to your exact sizes. The blind in its brackets/headrail/cassette (widest point) will be supplied exactly to the size that has been ordered. this is called exact size Subject to the normal manufactures working +/- tolerances

Whether measuring for a recess or exact please remember the fabric will always be narrower than the overall blind size to allow for components such as side controls and brackets.
This varies depending on the product, Roller blinds for example have a fabric width 30-34mmn less than the overall blind size.
Contact us if you require clarification regarding your chosen product.

Measuring for Bay Window

Determine the depth of the blinds you are mounting and use this for the width of your cardboard: Contact us for Blind depths.

Cut two pieces of cardboard (depth determined from 1 above) wide by 30cm (12") long.
Important: If spacer blocks or extension brackets will be used for extra clearance on outside mounts, add the amount of extra clearance to the width dimension of the cardboard before measuring.

Place the strips in the left angle first, and bring them together until the front corners of the cardboard meet. Mark points "A" and "B".

Repeat this step for the right side angle, marking points "C" and "D".

Measure between points "B" and "C" to obtain the width measurement of the center blind.

Measure from point "A" outward to the desired width to obtain the width measurement of the left blind.

Measure from point "D" outward to the desired width to obtain the width measurement of the right blind.

Deduct about 5mm from each of your measurements to allow for clearance, and order Exact

Measuring for bay window Measuring for bay window diagram

Measuring for INTU

Measuring for Perfect Fit

How to get your bead depth

How to get your bead depth

The Bead Depth is the distance from the glass to the outer frame, typically a minimum of 11mm to a maximum of 27mm.

To measure this, simply place a ruler over the corner of the frame and use a metal tape measure. Alternatively you can use a depth gauge (TP487) to take this measurement.