Luxaflex Wooden Blinds 70mm
The NEW 2020 Luxaflex® Wooden Blinds versatile and timeless. Also available in 50mm slats.
Luxaflex® Wooden Blinds create the ultimate style statement. With the Luxaflex® edge in both design and operation, our collection offers infinite ways to make them your own. By combining knowledge and innovations, we create wood blinds with great looks and quality performance.
We'll ensure the best type of light control based on the requirements of your windows from a small expanse to larger windows and doors. By offering two slat sizes, 50 mm and 70 mm, you can choose just the right amount of sunlight and view to suit your design and privacy needs.
Luxaflex Wooden Blinds can be accessorised with stylish Fabric tapes for a truly personal look. Add one of our linen-feel woven tapes in 10 mm or 38 mm to create an interesting effect. From bold or subtle colours to on-trend patterns, you can choose a look that compliments your rooms decor and style.
Colour co-ordinated headrail, cords, ladder strings and wooden pull
Steel headrail that is covered by a matching wood valance which attaches with an easy magnet system.
Luxaflex Wood Blinds are made from real wood (excluding Faux Wood Blinds). Colour and pattern variations are a natural characteristic of wood and do not indicate a defect in the product. Exposure to direct and indirect sunlight can lead to a change in colour. Discolouration does not indicate a product defect but is inherent to the material. Note: Heat and humidity combined with light will accelerate the discolouration process.
Measuring for inside a Recess
First ensure that the recess your blind is going into is not obstructed in any way so the blind can hang freely. Look out for protruding tiles, pipes, skirting boards etc.
Measure at the top, middle and bottom of the window recess and note down the smallest measurements to the nearest millimetre, this is the recess size.
We will make your blind smaller to fit into the recess.
There is no need for you to make any adjustments we do this in production this is called recess size
Your blind will arrive slightly smaller than the recess size, it will then hang freely within the recess at the correct size.
If you want to make your own allowances order as ‘exact’ which is explained below.
Measuring for outside a recess or Exact
Decide how much you want to overlap the blind on all sides - we recommend this should be at least 50mm (2 inches) each side in most instances, or the exact size you want the blind to be, if fitting inside a recess
Carefully measure the at the top, middle and bottom for the width and the left, right and middle for the drop
Remember on most blinds the fabric will be less than the overall width of the blind ordered. You should allow for this when measuring outside a recess.
We will make your blind to your exact sizes. The blind in its brackets/headrail/cassette (widest point) will be supplied exactly to the size that has been ordered. this is called exact size Subject to the normal manufactures working +/- tolerances
Whether measuring for a recess or exact please remember the fabric will always be narrower than the overall blind size to allow for components such as side controls and brackets.
This varies depending on the product, Roller blinds for example have a fabric width 30-34mmn less than the overall blind size.
Contact us if you require clarification regarding your chosen product.
Measuring for Bay Window
Determine the depth of the blinds you are mounting and use this for the width of your cardboard: Contact us for Blind depths.
Cut two pieces of cardboard (depth determined from 1 above) wide by 30cm (12") long.
Important: If spacer blocks or extension brackets will be used for extra clearance on outside mounts, add the amount of extra clearance to the width dimension of the cardboard before measuring.
Place the strips in the left angle first, and bring them together until the front corners of the cardboard meet. Mark points "A" and "B".
Repeat this step for the right side angle, marking points "C" and "D".
Measure between points "B" and "C" to obtain the width measurement of the center blind.
Measure from point "A" outward to the desired width to obtain the width measurement of the left blind.
Measure from point "D" outward to the desired width to obtain the width measurement of the right blind.
Deduct about 5mm from each of your measurements to allow for clearance, and order Exact