0151 924 9494
Home Wooden Blinds Sunwood Wooden Blinds 50mm
Motorisation Specialists Motorised
from £40.50

Sunwood Wooden Blinds 50mm

  • Offering 5 diverse and beautifully crafted collections reflecting the perfection of their native origins, Sunwood™ brings nature alive inside. The collections range from the subtlety of the Essential Collection to the high drama of the Gloss Collection. The Soft Grain Collection with its rich, natural finish, contrasts with the sheer flawlessness of the Perfect Grain, while the exquisitely formed Contour Collection completes this extensive choice of exceptional quality Wood Venetians.

    Also available in 25mm and 35mm slats.

    Eco Friendly: The basswood used in the Sunwood™ collection is sourced with careful consideration for the natural environment, allowing you to welcome the outside world into your home in an ethical way.

    Energy Efficiency: Not only are we conscious about where our wood comes from, but we strive to ensure it makes your home as energy efficient and kind to the environment as possible. Wood is a natural insulator, helping to keep the cold out during the winter months while the white stained woods will reflect the sun and help keep your interior space cool during the summer.

    Delivered in 7-10 working days.
    Express Service available if selected
    Details
  • Spec Download 

    2.5mm Thick Slats

    PVC Headrail with steel inserts 42mm high x 42mm deep.

    Colour Matching Valance and Bottom Bar.

    Colour matched cords and toggles.

    End fix brackets with centre support (if required on larger blinds).

     

    Specifications
  • Guides

Measuring Guide

Measuring for inside a Recess

First ensure that the recess your blind is going into is not obstructed in any way so the blind can hang freely. Look out for protruding tiles, pipes, skirting boards etc.

Measure at the top, middle and bottom of the window recess and note down the smallest measurements to the nearest millimetre, this is the recess size.

We will make your blind smaller to fit into the recess.

There is no need for you to make any adjustments we do this in production this is called recess size

Your blind will arrive slightly smaller than the recess size, it will then hang freely within the recess at the correct size.

If you want to make your own allowances order as ‘exact’ which is explained below.

Measuring for inside a recess
Measuring for outside a recess or exact

Measuring for outside a recess or Exact

Decide how much you want to overlap the blind on all sides - we recommend this should be at least 50mm (2 inches) each side in most instances, or the exact size you want the blind to be, if fitting inside a recess

Carefully measure the at the top, middle and bottom for the width and the left, right and middle for the drop

Remember on most blinds the fabric will be less than the overall width of the blind ordered. You should allow for this when measuring outside a recess.

We will make your blind to your exact sizes. The blind in its brackets/headrail/cassette (widest point) will be supplied exactly to the size that has been ordered. this is called exact size Subject to the normal manufactures working +/- tolerances

Whether measuring for a recess or exact please remember the fabric will always be narrower than the overall blind size to allow for components such as side controls and brackets.
This varies depending on the product, Roller blinds for example have a fabric width 30-34mmn less than the overall blind size.
Contact us if you require clarification regarding your chosen product.

Measuring for Bay Window

Determine the depth of the blinds you are mounting and use this for the width of your cardboard: Contact us for Blind depths.

Cut two pieces of cardboard (depth determined from 1 above) wide by 30cm (12") long.
Important: If spacer blocks or extension brackets will be used for extra clearance on outside mounts, add the amount of extra clearance to the width dimension of the cardboard before measuring.

Place the strips in the left angle first, and bring them together until the front corners of the cardboard meet. Mark points "A" and "B".

Repeat this step for the right side angle, marking points "C" and "D".

Measure between points "B" and "C" to obtain the width measurement of the center blind.

Measure from point "A" outward to the desired width to obtain the width measurement of the left blind.

Measure from point "D" outward to the desired width to obtain the width measurement of the right blind.

Deduct about 5mm from each of your measurements to allow for clearance, and order Exact

Measuring for bay window Measuring for bay window diagram
Filters

Filters


Filter By:
Brands
Fit Type
Colour
Style
Feature
Slat Size

Min size: 290mm x 150mm. Max size: 2400mm x 2700mm
Enter sizes to show prices
24 Products