Luxaflex Pleated TruFit

Code: Luxaflex Plisse

The perfect solution when INTU or Perfect-Fit Blinds are not suitable.

TruFit ™ - an idea so simple yet effective, the TruFit ™system enables Duette Shades to be fitted to the glass without drilling, making it an ideal solution for doors, UPVc windows and conservatories.

Easy, clean and safe child
Luxaflex® TruFit ™ has a small installation depth that puts the blind close against the window. Because the window covering is mounted directly onto the glass, TruFit ™ is ideal for tilt and turn windows.  The window covering is simple, light and quick to operate and easy to click from the profile when windows need to be cleaned. 
Thanks to the handle operation, the system is also safe for babies, young children and pets.

A wide range of colour and fabric finishes are available from the 25mm Plisse collection. 

Luxaflex Pleated TruFit Luxaflex Pleated TruFit Luxaflex Pleated TruFit Luxaflex Pleated TruFit Luxaflex Pleated TruFit

Quick Order

Order or price multiple blinds of the same colour, change all the options together or edit the options for each blind separately.

Maximum Blind Size: mm x mm
You can enter your sizes in centimeters, millimeters or inches.
mm cm inch
Add More
Add to Basket
Select Colour

20mm Transparent Plisse Fabrics

A sheer shade for a maximum light flow and a gentle obscuring view.

20mm Semi Transparent Plisse Fabrics

The neat 20mm pleat still allows light flow but with a greater degree of privacy.

20mm Translucent Plisse Fabrics

A 20mm pleated fabric using 20mm translucent type fabrics, that allow light though yet still keep privacy.

20mm Room Darkening Plisse Fabrics

Black-Out ''FABRICS"

*Please note that preciseness of colour cannot be guaranteed as this depends on the screen settings of your computer.

TruFit Video

Size Limits

Min Width 250

Max Width 1280

Min Drop 200

Max Drop 2200*

*fabric dependent 

How To Measure TruFit

How to Fit PDF

How to Fit Tru-Fit Blinds

How to Measure

The information below is for standard free hanging blinds only, for INTU Perfect-Fit, & Tru-fit blinds please follow their unique how to measure instructions 


Measuring for inside a Recess

First ensure that the recess your blind is going into is not obstructed in any way so the blind can hang freely.
Look out for protruding tiles, pipes, skirting boards etc.

Measure at the top, middle and bottom of the window recess and note down the smallest measurements to the nearest millimetre, this is the recess size.

We will make your blind smaller to fit into the recess.

There is no need for you to make any adjustments we do this in production THIS IS CALLED RECESS SIZE

Your Blind will arrive about 3-10mm smaller, so it hangs freely and fits perfect within the recess

All Fabric Blinds will have a narrower fabric width than the total blind size ordered. This is to accommodate the side controls and brackets etc.
This applies to both recess and exact sizes.  For Roller Blinds this can be up to -35mm  

For Venetian Blinds the recess allowance is only taken from the width.

Measuring for outside a recess or Exact


Decide how much you want to overlap the blind on all sides - we recommend this should be at least 50mm (2 inches) each side in most instances.
or the exact size you want the blind to be, if fitting inside a recess

Carefully measure the at the top, middle and bottom for the width and the left, right and middle for the drop

on roller blinds and some shades ( Facette, Silhouette, Multishade etc ) the fabric will be less than the overall width of the blind/sizes given, so you must allow for this.

We will make your blind to your exact sizes.
The product in its brackets is supplied exactly to the size that has been ordered. THIS IS CALLED EXACT SIZE
Subject to the normal manufactures working +/- tolerances


In Short - Recess we make the allowance - Exact you make the allowance


In Compliance with Child Safety Laws EN13120 - Blinds with cord or chains will be less than or equal to 1000mm, this is for blinds up to 2500mm drop. For blinds with a drop greater than 2500mm the control length will be less or equal to the drop of the blind minus 1500mm. If you supply us with the installation height the distance from the floor to the end of the control will be 1500mm off the floor. 

Measuring for Bay Window

  1. Determine the depth of the blinds you are mounting and use this for the width of your cardboard:
    Contact us for Blind depths.
  2. Cut two pieces of cardboard (depth determined from 1 above) wide by 30cm (12") long.
    Important: If spacer blocks or extension brackets will be used for extra clearance on outside mounts, add the amount of extra clearance to the width dimension of the cardboard before measuring.
  3. Place the strips in the left angle first, and bring them together until the front corners of the cardboard meet. Mark points "A" and "B".
  4. Repeat this step for the right side angle, marking points "C" and "D".
  5. Measure between points "B" and "C" to obtain the width measurement of the center blind.
  6. Measure from point "A" outward to the desired width to obtain the width measurement of the left blind.
  7. Measure from point "D" outward to the desired width to obtain the width measurement of the right blind.
  8. Deduct about 5mm from each of your measurements to allow for clearance, and order Exact


Order a sample:

Samples cost just £1 each, you will automatically receive a £5 promotional code off your future blind order.
Select your samples from the list below.
Enter Your Sizes
Your Measurements
mm cm inch
Width: Drop: Set Size clear sizes
Select Slat Size